Logging In and Logging Out at YSoft SafeQ Terminal UltraLight

Logging In

To use the YSoft SafeQ functions at the printer, you must first log in. The method you use depends on how the system is set up at your location.

Your system may be configured so that you can choose to log in with:

Using Card

To log in, place your ID card on the terminal as shown here. If your ID card is not recognized and Card Activation Codes are enabled in the YSoft SafeQ management interface, you will get an Enter Card Activation Code sequence. If you know your card activation code, enter it and press OK, otherwise, contact your YSoft SafeQ administrator.

images/download/thumbnails/160480196/ul_auth1.PNG

Using PIN

Press the keys to enter your PIN (2 to 8 numbers); then press OK.

Using Card and PIN

To log in, place your ID card as shown in the Using Card section, then use the keys to enter your PIN (2 to 8 numbers) and press OK. If your ID card is not recognized and Card Activation Codes are enabled in the YSoft SafeQ management interface, you will get an Enter Card Activation Code sequence.

images/download/thumbnails/160481654/worddavc87701ea5bf5bd7daf08b99439abcbe0.png
Enter Card Activation Code

If you know your card activation code, enter it and press OK, otherwise, contact your YSoft SafeQ administrator.

If authentication is successful:

You can now use the printer.

If authentication is unsuccessful:

This LED sequence indicates that the terminal did not recognize your ID card:

images/download/thumbnails/160480196/ul_auth_not_success.PNG

Place the card on the terminal again. If authentication is still not successful, contact your YSoft SafeQ administrator.

Logging Out

To log out, touch the X button or OK button on the terminal or swipe any card (if available).

images/download/attachments/160480196/ul_logout1.PNG images/download/thumbnails/160480196/ul_auth12.PNG

If you do not log out, the printer automatically logs you out after a period set by your system administrator (typically three minutes).