Configuring an Environment with YSoft SafeQube 2

When you want to integrate YSoft centralized scan processing with an environment using YSoft SafeQube 2, you need to meet the following requirements and follow the installation guide.

Typical environment

  • Management node

    • Management Server

    • Spooler Controller

    • Workflow Processing System

  • YSoft SafeQube 2 branch node(s)

    • Spooler Controller

    • Terminal Server

Configuring WebDAV to Enable Scanning on YSoft SafeQube 2

The default configuration of Document Store (local) is not suitable for YSoft SafeQube 2, please follow the instructions in Configuring Document Store to set up a WebDAV document store instead.

If you want to use unsecure channel, you must set property webdavSsl to Disabled and in SafeQube terminal server configuration set property TS_workflowStorageRoot to use http, not https.

Configuring Spooler Controllers

  1. Install the YSoft SafeQube 2 node in the environment:

    1. Configure YSoft SafeQube 2 (follow the YSoft SafeQube 2 Deployment).

    2. Stop the YSoft SafeQube 2 applications: Spooler Controller and Terminal Server.

  2. Add a Spooler Controller for the YSoft SafeQube 2 node Devices > Spooler Controller Groups > Add Spooler Controller.

  3. Fill in a name (e.g., YSoft SafeQube).

  4. Enter the YSoft SafeQube IP address in the Network address property.

  5. Enter the YSoft SafeQube 2 spoc.localGUID value in the GUID property.

    images/download/attachments/160481494/addspoc.PNG

  6. Start the YSoft SafeQube 2 applications (Spooler Controller and Terminal Server), and wait until they are ready.

  7. Install all terminals.

    1. Do not use Central Spooler Controller, the terminals must be installed from YSoft SafeQube 2 Spooler Controller.