Mounting/dismounting YSoft USB reader v2 on a device

Following chapter displays how to mount USB reader v2 on a device. The configuration may vary from device or vendor type. As you can mount the card reader not only on the device, but also to a workstation (YSoft SafeQ 5 Client application) or YSoft Payment Machine, the mounting may also vary according to the usage.

Mounting of the reader module

The mounting kit enables both right-handed and left-handed installation on the MFD.
The following components are included in the mounting kit package:

  • plastic holder

  • screws

  • reader module

Prepare the plastic holder by removing the plastic releasing tool. This tool can be used later to remove the cart reader from the holder. See following pictures.

images/download/attachments/160481488/worddav7de9d8c5a64c3a18c898c83bd7ab62ff.png
You can fix the holder directly on the MFD using screws. If it is not possible to use screws, use double sided tape to fix the plastic holder.
images/download/attachments/160481488/worddav442887017d65369bcea471f6fd7c497a.png
Attach the reader module to the plastic holder.
images/download/attachments/160481488/worddav6021357b9f17cdac3334626f0fbf0842.png
Finally, connect the reader's USB cable to a free USB slot.

Dismounting of the reader module

Release the reader module by pushing the releasing tool, screw driver, or a similar tool into the plastic holder while moving the reader module upwards. See following pictures.
images/download/attachments/160481488/worddav363a835e8fbd344fd5057a3b9da596dc.png
Disconnect the reader module's USB cable and remove the reader module.

Loosen the screws and remove the plastic holder from the device.