Konica Minolta - Configure inactivity timeout

The terminal inactivity timeout setting in the user's additional configuration is supported only for YSoft SafeQ Embedded Terminal for Konica Minolta - 2nd Gen.. The timeout is also set directly on the machine.

Follow these steps to set the terminal inactivity timeout:

  1. Press the hardware Home button on the MFD.

  2. Tap Utility.

    images/download/attachments/160482282/image2014-11-14_10_59_27.png

  3. Tap Administrator Settings.

    images/download/attachments/160482282/image2014-11-14_11_37_31.png

  4. Enter the Administrator password for the MFD, and then tap OK.

    The default is 1234567812345678.

    images/download/attachments/160482282/image2014-11-14_11_40_22.png

  5. Tap System Settings.

    images/download/attachments/160482282/image2014-11-14_11_40_44.png

  6. Tap Reset settings.

    images/download/attachments/160482282/image2016-2-16_18_30_6.png

  7. Tap System Auto Reset.

    images/download/attachments/160482282/image2016-2-16_18_30_57.png

  8. Press C on the keyboard and then press the number according to your preferred timeout in minutes. Confirm changes by tapping OK.

    images/download/attachments/160482282/image2016-2-16_18_34_4.png

  9. Change timeouts in Auto Reset screen (see point 7) in a similar way.