Configuring YSoft USB Card Reader to work with HP Embedded terminal

Device FW that supports YSoft USB Card Reader

MFD with Firmware Bundle Version 4.6.0.1 or higher the YSoft USB card reader is supported . On the older MFD FW the YSoft USB card reader is not registered and FW update of the device is needed to a minimum of FW 4.6.0.1.

Configure the YSoft USB Card Reader

Run the YSoft Card Reader Tool and set the reader to “USB reader for HP MFD” :
The tool can be found in the complete Pack under: \YSoft SafeQ Complementary Solutions\YSoft USB Readers\YSoft_Card_Reader_Tool.exe

1.1: Run the YSoft Card Reader Tool mark the reader (1) and click configure (2):

images/download/attachments/160482167/image2018-6-25_16-46-4.png

1.2: Set the USB mode to “USB reader for HP MFD”, click to edit the USB mode (1) and select “USB reader for HP MFD” option (2) then click configure (3):

images/download/attachments/160482167/image2018-6-25_16-47-1.png

1.3: Click OK and The YSoft USB Card Reader is ready to mount to the device:

images/download/attachments/160482167/image2018-6-25_16-49-54.png

Supported USB card readers

  • all YSoft USB V3 reader models in HP USB mode